Anti-Scale Filter
For Reduction of Hardness, Chlorine Taste and Odor, Chloramine, and Sediment
Features and Benefits
-
Designed for drinking water applications in residential, food equipment, and commercial settings
-
For reduction of hardness, chlorine taste & odor, chloramine, and sediment
-
Proprietary ScaleStopper™ media compliant with IAPMO Z601 for reduction of scale buildup
-
Manufactured in the USA
-
5-micron rating
-
Sediment protection on outer layer
-
Filter cartridge meets FDA/CFR Title 21 regulations for food and water contact
-
Short rinse time for carbon fines
-
Low pressure drop combined with exceptionally high dirt holding capacity
-
Eco-Friendly Materials: Our filters use activated and acid-washed coconut shell carbon, a renewable source of carbon that is environmentally friendly and highly efficient in removing impurities from water.
-
Porous and Structured Design: The coconut shell carbon’s porous structure allows for effective adsorption of contaminants, while the tightly structured surface helps prevent channeling and clogging in the filtration systems.
Quality You Can Taste
- Comprehensive in house continuous quality monitoring and testing
- NSF/ANSI Component Certified
- Repeated cert verification testing for Prop 65 compliance
Product Line
| Model Number | Part Number | Dimensions inch | Micron Nominal | Capacity* | Phosphate Amount | Pressure Drop* |
| HFPHOS-10 | 304400 | 2.5 x 10 | 5 Mic | 12 Months at 1 gpm | 8 oz | 3.5 psid |
| HFPHOS-20 | 304410 | 2.5 x 20 | 5 Mic | 12 Months at 2 gpm | 8 oz | 4.0 psid |
| HFPHOS-10-4 | 304430 | 4.5 x 10 | 5 Mic | 12 Months at 3 gpm | 10 oz | 7.0 psid |
| HFPHOS-20-4 | 304440 | 4.5 x 20 | 5 Mic | 12 Months at 7 gpm | 12 oz | 16.0 psid |
*Capacity and performance are based on 15 grains hardness at noted flow rate
Performance and product specifications are based upon the filter being integrated with a complete system. This system includes filter, housing, fittings, tubing and connected to a regulated pressurized water source. Filter requires 5 minutes flush. Refer to system installation and operation manual for proper installation and filter replacement process. It is essential to follow operational, maintenance, and filter replacement procedures to ensure proper filter performance.
Cartridge capacity may vary according to flow rate, inlet line pressure and local water conditions, which may require more frequent cartridge replacement. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or substances reduced by this filter are not necessarily in your water.
Specifications
Operating Pressure: 20 psig (1.38 bar) – 125 psig (8.62 bar)
Operating Temperature: 40º F (4º C) – 125º F (52º C)
Fit standard 10” and 20” drop in housing
Warranty
Hydro-Flow Filtration Technologies warrants that the products delivered will be free from any defects in workmanship or materials. Further, the warranty provided herein applies only when used within the product’s specifications and service life, from the date of installation, beyond which time or use Hydro-Flow Filtration Technologies is absolved of any and all liability for any use of the product. In the event of defect or non-conformity, buyer shall promptly notify Hydro-Flow Filtration Technologies in writing, supplying proof of purchase dates, installation dates, and will protect and retain the products for investigation, or Hydro-Flow Filtration Technologies is absolved of any and all liability for any use of the product. There are no other warranties, either merchantability or fitness, either expressed or implied.
