VOC Chloramine Filter - Hydro-Flow Filtration Systems

Chloramine Filter

For Reduction of VOC, Chloramine and Chlorine Taste and Odor, and Sediment

Features and Benefits

Designed for drinking water applications in residential, food equipment, and commercial settings
For reduction of volatile organic compounds (VOC), chloramine, chlorine taste & odor, and sediment
Manufactured in the USA
0.5-micron rating
Sediment protection on outer layer
Short rinse time for carbon fines
Low pressure drop combined with exceptionally high dirt holding capacity
Eco-Friendly Materials: Our ﬁlters use activated and acid-washed coconut shell carbon, a renewable source of carbon that is environmentally friendly and highly efﬁcient in removing impurities from water.
Porous and Structured Design: The coconut shell carbon’s porous structure allows for effective adsorption of contaminants, while the tightly structured surface helps prevent channeling and clogging in the ﬁltration systems.
Lead Free Certified

Quality You Can Taste

Comprehensive in house continuous quality monitoring and testing
NSF/ANSI Component Certified
Performance claims tested and verified by independent ANSI accredited laboratories
Repeated cert verification testing for Prop 65 compliance

Product Line

Model Number	Dimensions (inches)	VOC Reduction Capacity*	Chloramine Reduction Capacity*	Chlorine Reduction Capacity*	Pressure Drop*
HFVOC-10	2.5 x 10	1,000 Gal @ 1 GPM 2,800 L @ 3.8 l/min	2,000 Gal @ 1 GPM 5,700 L @ 3.8 l/min	60,000 Gal @ 1 GPM 75,000 L @ 3.8 l/min	10 PSID @ 1 GPM
HFVOC-20	2.5 x 20	2,000 Gal @ 2 GPM 5,700 L @ 7.6 l/min	4,000 Gal @ 2 GPM 11,000 L @ 7.6 l/min	80,000 Gal @ 2 GPM 150,000 L @ 7.6 l/min	10 PSID @ 2 GPM
HFVOC-10-4	4.5 x 10	3,000 Gal @ 3 GPM 7,500 L @11.4 l/min	6,000 Gal @ 3 GPM 13,000 L @ 11.4 l/min	160,000 Gal @ 3 GPM 227,000 L @11.4 l/min	7 PSID @ 3 GPM
HFVOC-20-4	4.5 x 20	4,000 Gal @ 6 GPM 14,000 L @ 22.7 l/min	12,000 Gal @ 6 GPM 26,500 L @ 22.7 l/min	320,000 Gal @ 6 GPM 454,000 L @ 22.7 l/min	7 PSID @ 6 GPM

*Claims of capacity and performance are based upon independent laboratory test results and/or manufacturers internal test results.

Performance and product specifications are based upon the filter being integrated with a complete system. This system includes filter, housing, fittings, tubing and connected to a regulated pressurized water source. Filter requires 5 minutes flush. Refer to system installation and operation manual for proper installation and filter replacement process. It is essential to follow operational, maintenance, and filter replacement procedures to ensure proper filter performance.

Cartridge capacity may vary according to flow rate, inlet line pressure and local water conditions, which may require more frequent cartridge replacement. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or substances reduced by this filter are not necessarily in your water.

Specifications

Operating Pressure: 20 psig (1.38 bar) – 125 psig (8.62 bar)
Operating Temperature: 40º F (4º C) – 125º F (52º C)
Fit standard 10” and 20” drop in housing

Warranty

Hydro-Flow warrants that the products delivered will be free from defects in workmanship or materials. Further, the warranty provided herein applies, only when used within the products specifications and service life, which is one year from the date of installation or two years from the date of manufacture whichever occurs first, (at which time the filter must be removed and replaced with a new one), beyond which Hydro-Flow is absolved of any and all liability for any use of the product. In the event of a defect or non-conformity, buyer shall promptly notify Hydro-Flow in writing, supplying proof-of-purchase dates, installation dates, and will protect and retain the products for investigation, or Hydro-Flow is absolved of any and all liability from any use of the product. There are no other warranties, either of merchantability or fitness, either expressed or implied.